Artūrs Ričkovs
KAESSBOHRER K.SKS BS / 27 - 12 / 27 DE
Cena (netto):
30 900 €
Specifikācija
Gads 05/2022
Tips Pašizgāzējs
Asis 3
Marka asīm BPW, disku bremzes
Asis un riepu atlikums
© Z Truck, 2025
Adrese:
Jelgavas ceļš 14a, Tīraine, Mārupe, Latvija
Tālr./Fakss:
+371 26642999
E-pasts:
arturs@ztruck.lv
Jauna puspiekabe ar garantiju. Puspiekabe atrodas uz vietas Rīgā un ir pieejama uzreiz.
TEHNISKĀ INFORMĀCIJA
Tilpums 27,0 m3
Sakabes augstums (H5) 1,220 mm
Kravas kastes garums 8.000mm
Kopējais platums (W) 2.550 mm
Puspiekabes augstums 3.170 mm
Kopējais Garums (L) 9.000 mm
Garenbāze (WB) 4.900 mm
Šasijas platums 1.300 mm
Ass slodze 27.000 kg
Pašmasa 6650kg
Bruto svars 42 000kg
Virsbūves metāla biezumi: HARDOX!!! All HB450 metāls, Sānu sienas 4mm,priekša 4mm, aizmugure 4mm, grīda 5mm.
Axles: BPW AL II HD air suspension and disc brake axle with 9 ton capacity each
Axle Lifting: 1st axle lifting system operating automatically
Automatic axle lifting system controlled by EBS which facilitates manuevers and
Axle Lifting Control: extends tire life. Easily controllable using the button from tractor cabinet
Dual circuit electro-pneumatic WABCO brand EBS 2S/2M brake system with anti-lock
Brake System: (ABS) and tilt control system (RSS) in compliance w ith Regulation UN ECE R13
Electric System: Aspöck Europoint III lightning installation with 24V LED side position lamp and 2 x 7
and 1 x 15 pin sockets, in compliance with Regulation UN ECE R48 and ADR
Legislation
Chassis: Made of high quality and strength S700 MC steel, in compliance with Standard ISO
1726-2 and ISO 1726; made of two welded longitudinal beams in "I" form with cross
beams at needed distances. Reinforced with KTL protection with Kässbohrer expertise
(10 years warranty for perforation)
Body: The front wall, door and side wall are made of and the floor is made of HB450 high
Body strength and wear- and impact resistant steel
Smart Board: Multi-functional Wabco Smartboard, providing various information such as; traveled
distance(odometer), tire or brake pads condition, axle load, suspension level
control, "Finisher" control and diagnostics etc..
Automatic Unloading System: Automatic lowering system is activated while the tipper upper structure raises. The aim is to lower the center of the gravity of the upper structure and prepare for the unloading position.
TEHNISKĀ INFORMĀCIJA
Tilpums 27,0 m3
Sakabes augstums (H5) 1,220 mm
Kravas kastes garums 8.000mm
Kopējais platums (W) 2.550 mm
Puspiekabes augstums 3.170 mm
Kopējais Garums (L) 9.000 mm
Garenbāze (WB) 4.900 mm
Šasijas platums 1.300 mm
Ass slodze 27.000 kg
Pašmasa 6650kg
Bruto svars 42 000kg
Virsbūves metāla biezumi: HARDOX!!! All HB450 metāls, Sānu sienas 4mm,priekša 4mm, aizmugure 4mm, grīda 5mm.
Axles: BPW AL II HD air suspension and disc brake axle with 9 ton capacity each
Axle Lifting: 1st axle lifting system operating automatically
Automatic axle lifting system controlled by EBS which facilitates manuevers and
Axle Lifting Control: extends tire life. Easily controllable using the button from tractor cabinet
Dual circuit electro-pneumatic WABCO brand EBS 2S/2M brake system with anti-lock
Brake System: (ABS) and tilt control system (RSS) in compliance w ith Regulation UN ECE R13
Electric System: Aspöck Europoint III lightning installation with 24V LED side position lamp and 2 x 7
and 1 x 15 pin sockets, in compliance with Regulation UN ECE R48 and ADR
Legislation
Chassis: Made of high quality and strength S700 MC steel, in compliance with Standard ISO
1726-2 and ISO 1726; made of two welded longitudinal beams in "I" form with cross
beams at needed distances. Reinforced with KTL protection with Kässbohrer expertise
(10 years warranty for perforation)
Body: The front wall, door and side wall are made of and the floor is made of HB450 high
Body strength and wear- and impact resistant steel
Smart Board: Multi-functional Wabco Smartboard, providing various information such as; traveled
distance(odometer), tire or brake pads condition, axle load, suspension level
control, "Finisher" control and diagnostics etc..
Automatic Unloading System: Automatic lowering system is activated while the tipper upper structure raises. The aim is to lower the center of the gravity of the upper structure and prepare for the unloading position.
Artūrs Ričkovs
/ZtruckLV